a)
For O-ring
Size 20 - 25: Ø 5 · 1.0 (mm)
Open lube port if necessary (see general technical notes and information in the "Maintenance" section).
b)
Lube nipple, size 20 - 25:
Funnel-type lube nipple DIN 3405-B M3x5, B2 = 8 mm
Lube port with additional anti-twist feature.
When using different lube nipples, pay attention to the screw-in depth of 5 mm!
The lube nipple is included in the scope of delivery (not installed).
Size 20: Connection is possible on end-face.
Size 25: Connection is possible on all sides.
| T | 60 | mm | |
| A | 73 | mm | |
| A2 | 23 | mm | |
| B | 81 mm +0.5 | ||
| E1 | 60 | mm | |
| E8 | 38,30 | mm | |
| H | 33 | mm | |
| Dimension H2 with cover strip | 24,45 | mm | |
| K1 | 16,60 | mm | |
| K3 | 4,10 | mm | |
| N1 | 9,30 | mm | |
| S1 | 6,70 | mm | |
| ØS5 | 7 | mm |
| V1 | 7,50 | mm | |
| A1 | 36,50 | mm | |
| A3 | 25 | mm | |
| B1 | 57,80 | mm | |
| E2 | 35 | mm | |
| E9 | 8,50 | mm | |
| H1 | 26,50 | mm | |
| Dimension H2 without cover strip | 24,25 | mm | |
| K2 | 17 | mm | |
| K4 | 4,10 | mm | |
| N6 | 15.2 mm ±0.5 | ||
| S2 | M8 | ||
| S9 | M3x5 |
| amax (If Fcomb > 2.8 • Fpr : amax = 50 m/s2) | 250 | m/s² | |
| m | 0,60 | kg | |
| Operating conditions | Operating conditions | ||
| Permissible ambient temperature (min ... max) (Up to 100 °C permissible for short periods. For operation at negative temperatures, please consult us. ) | -10 °C ... +80 °C |
| vmax | 3 | m/s | |
| m (Without friction of seal) | 0,002 ... 0,003 | ||
| Size (BSHP Ball Runner Block) | 25 |
