a)
For O-ring: Size 25: dia. 5 · 1.5 (mm). Size 65: dia. 7 · 1.5 (mm). Open lube bore as required (see general technical notes and information in the "Maintenance" section). For new constructions, use runner blocks for lubrication from above.
b)
Recommended location for pin holes (dimensions E4, see general technical notes and information in the "Assembly" section). Due to manufacturing reasons, there may be rough-drilled holes at the recommended positions. These can be bored open.
c)
Lube nipple, thread M6 – 8 deep: Connection only possible on the end face. Other lube fittings will have different dimensions. For more details on lube fittings, see “Accessories”.
d)
Due to manufacturing reasons, guide rails in accuracy class H may not have a slot on the base.
e)
Size 65
| T2 | 30 | ||
| A1 | 24 | ||
| A3 | 12.5 | ||
| B1 | 63.5 | ||
| B3 | 97 | ||
| d8.2 | 5 | ||
| E2 | 35 | ||
| E8.2 | 40.22 | ||
| E9.2 | 21.4 | ||
| H1 | 30 | ||
| Dimension H2 without cover strip | 23.4 | ||
| N3 | 8 | ||
| N6 | 14.3 mm ±0.5 | ||
| ØS5 | 7 | ||
| V1 | 7.5 |
| A | 48 | ||
| A2 | 23 | ||
| B | 91 | ||
| B2 | 93 | ||
| d8 | 6 | ||
| E1 | 35 | ||
| E8 | 33.4 | ||
| E9 | 8.3 | ||
| H | 36 | ||
| Dimension H2 with cover strip | 23.6 | ||
| K1 | 19.1 | ||
| N5 | 5.5 | ||
| S2 | M6 | ||
| S9 | M3 ‒ 5 mm deep |
| Operating conditions | Operating conditions | ||
| amax | 150 | ||
| m | 0.5 | ||
| μ | 0.0004 ... 0.001 |
| Permissible ambient temperature (min ... max) | -10 °C ... +80 °C | ||
| vmax | 3 | ||
| FR | 30 | ||
| Material | CS |
