0

R18514312A Bosch Rexroth

REXROTH R18514312A PATÍN DE RODILLOS DE ACERO

RWD-045-FNS-C3-S-2-AS

$1.731,07 disponible con envío de 3 a 7 días a United States

Encuentra el rail perfecto para este patín con un solo clic

Especificaciones

  • High torque capacity
  • The same high load ratings in all four main directions of loading
  • Maximum rigidity under load from all directions through two additional mounting screw holes at the center of the roller runner block
  • Unrestricted interchangeability
  • All guide rail versions can be combined at will with all roller runner block variants

Series (R1851) Flanged, normal, standard height R1851...2
Size (4) 45 size
Preload class (3) C3 High preload
Accuracy class (1) SP Super Precision Accuracy Level
Seals (2A) AS with longitudinal seal

a) For O-ring: Size 25: Ø 5 • 1.5 (mm), size 35 to 65: Ø 7 • 1.5 (mm). Open lube port if necessary (see lubricating and mounting instructions).
b) Recommended position for pin holes (E4 dimensions, see lubricating and mounting instructions). Pre-drilled holes may be present at this position for manufacturing reasons. They are suitable for drilling out.
c) Lube nipple, thread M6 - 8 deep: Connection is possible on all sides (at front and top for size 25). Dimensions differ among different connectors See "Accessories" for more information about lube ports.
d) For Roller Guide Rails of accuracy class H, this base area may be without a base slot for manufacturing reasons.
e) Sealing plugs may be present at this position for manufacturing reasons. Remove these prior to mounting.
f) Size 65

A 120 mm
A2 45 mm
A4 (Dimension A4 = Width of the additional longitudinal seal ) 55,60 mm
B1 101,50 mm
E2 80 mm
E4 98 mm
E8.1 -
E9 16,70 mm
E9.2 36,50 mm
H1 51 mm
Dimension H2 without cover strip 38,80 mm
K1 17,45 mm
N1 15 mm
N5 8 mm
ØS1 10,4
ØS5 14 mm
T (Dimension T = Division of the Roller Guide Rail) 52,50 mm
A1 60 mm
A3 37,50 mm
B 147
E1 100 mm
E3 60 mm
E8 62,90 mm
E8.2 72 mm
E9.1 -
H 60 mm
Dimension H2 with cover strip 39,10 mm
H3 (Dimension H3 = Total Roller Runner Block height including the additional longitudinal seal ) 53 mm
K2 20,35 mm
N2 13,50 mm
N6 22.4 mm ±0.5
S2 M12
S9 (Thread for adjoining parts) M4 ‒ 9mm deep
V1 10 mm
amax (Prerequisite: There must be preload, even during operation under load.) 150 m/s²
m 4,05 kg
m (Without friction of seal) 0,0004 ... 0,001
Size 45
vmax 4 m/s
FR (Guideline value for frictional drags of the complete, sealed and lubricated roller runner blocks. ) 40 N
Operating conditions Operating conditions
Permissible ambient temperature (min ... max) (Brief peaks up to 100 °C are permitted. For even lower sub-zero temperatures, please consult us. ) -10 °C ... +80 °C

Productos relacionados

R165182220
REXROTH
$224,15
R16512142Z
REXROTH
$221,29
R165121220
REXROTH
$298,91
R16517142Z
REXROTH
$260,94
R16513222Z
REXROTH
$271,33
R165189322
REXROTH
$132,48
R165121422
REXROTH
$225,40
R16512292Y
REXROTH
$236,93
R165139422
REXROTH
$184,38
R165151410
REXROTH
$432,44
R165151310
REXROTH
$285,58
R165152310
REXROTH
$483,48
R163181420
REXROTH
$144,10
R163181321
REXROTH
$171,02
R163121420
REXROTH
$120,48
R163179321
REXROTH
$148,69
$1.731,07
Stock disponible
Referencia R18514312A
Fabricante REXROTH
Unidades Precio / Unidad
1+ $1.731,07

Explore la serie REXROTH FNS
  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros