a)
For O-ring
Size 15: Ø 4 · 1.0 (mm)
Sizes 20 – 35: Ø 5 · 1.0 (mm)
Open lube port if necessary (see general technical notes and information in the "Maintenance" section).
b)
Lube nipple, sizes 15 – 20:
Funnel-type lube nipple DIN 3405-A M3x5, B2 = 1.6 mm
When using different lube nipples, pay attention to the screw-in depth of 5 mm!
Lube nipple, sizes 25 – 35:
Hydraulic-type lube nipple DIN 71412-A M6x8, B2 = 9.5 mm
When using different lube nipples, pay attention to the screw-in depth of 8 mm!
The lube nipple is included in the scope of delivery (not installed).
Connection is possible on all sides.
| T | 80 | mm | |
| A | 60 | mm | |
| A2 | 28 | mm | |
| B | 119.7 mm +0.5 | ||
| E1 | 40 | mm | |
| E8 | 48,40 | mm | |
| H | 42 | mm | |
| Dimension H2 with cover strip | 28,55 | mm | |
| K1 | 21 | mm | |
| K3 | 6,05 | mm | |
| N3 | 12 | mm | |
| S2 | M8 | ||
| S9 | M3x5 |
| V1 | 7 | mm | |
| A1 | 30 | mm | |
| A3 | 16 | mm | |
| B1 | 89,40 | mm | |
| E2 | 60 | mm | |
| E9 | 14,60 | mm | |
| H1 | 35,35 | mm | |
| Dimension H2 without cover strip | 28,35 | mm | |
| K2 | 22,70 | mm | |
| K4 | 6,05 | mm | |
| N6 | 17 mm ±0.5 | ||
| ØS5 | 9 | mm |
| amax (If Fcomb > 2.8 • Fpr : amax = 50 m/s2) | 500 | m/s² | |
| m | 1,05 | kg | |
| Operating conditions | Operating conditions | ||
| Permissible ambient temperature (min ... max) (Up to 100 °C permissible for short periods. For operation at negative temperatures, please consult us. ) | -10 °C ... +80 °C |
| vmax | 10 | m/s | |
| m (Without friction of seal) | 0,002 ... 0,003 | ||
| Size | 30 |
