REXROTH R902260169 MOTOR DE EMBOLOS AXIALES
A6VM055
$3.640,36
$7.280,71
-50%
Stock Limitado
solo disponible bajo consulta
Especificaciones
- All-purpose high pressure motor
- Size 28 … 1000
- Nominal pressure up to 400 bar
- Maximum pressure up 450 bar
- Open and closed circuits
- Metric version
| Series (A6V) | Bent-axis design, variable |
|---|---|
| Operating mode (M) | Motor |
| Size (055) | Geometric displacement |
| Control device (HP5) | Proportional control, negative control ΔpSt = 10 bar |
| Pressure control/override (00) | Without pressure control/override |
| Connector for solenoids (0) | Without connector (without solenoid, only for hydraulic control) |
| Swivel angle sensor (0) | Without |
| Additional function (0) | Without additional function |
| Stroking time damping (0) | Without damping (standard with HP and EP) |
| Setting range for displacement (C) | long |
| Series (65) | Series 6, index 5 |
| Version of port and fastening threads (M) | Metric ports based on ISO 6149 with O-ring seal, metric fastening threads according to DIN 13 |
|---|---|
| Direction of rotation (W) | Viewed on drive shaft, bidirectional |
| Seal Material (V) | FKM (fluorocarbon rubber) |
| Drive shaft bearing (0) | Standard bearing |
| Mounting flange (M4) | ISO 3019-2 125-4 |
| Drive shaft (Z6) | Splined shaft DIN 5480 W30×2×14×9g |
| Working port (2) | SAE working ports A and B at side, opposite |
| Valve (0) | Without valve |
| Speed sensor (0) | Without speed sensor |
| Standard/special version (0) | Standard version |