| Design | Round | ||
| Electrical output | Non-contacting, 2-wire | ||
| Corrosion resistance class CRC | 1 - Low corrosion stress | ||
| Switching status indication | Yellow LED | ||
| Product weight | 20 g | ||
| Tightening torque | 10 Nm | ||
| Size | M12 | ||
| Reverse polarity protection | For all electrical connections | ||
| Mains frequency | 50 Hz | ||
| Operational voltage range AC | 20 V ... 265 V | ||
| Min. load current | 5 mA | ||
| Max. output current | 200 mA | ||
| Max. switching frequency DC | 1.200 Hz | ||
| Switching element function | N/O contact | ||
| Repetition accuracy | 0,1 mm | ||
| Reduction factors | Aluminium = 0.5 Stainless steel St 18/8 = 0.9 Copper = 0.4 Brass = 0.6 Steel St 37 = 1.0 | ||
| Rated operating distance | 2 mm | ||
| CE mark (see declaration of conformity) | To EU EMC Directive To EU Low Voltage Directive | ||
| Symbol | 991.714 |
| Selection of sensor design | Standard | ||
| Additional information for sensor selection | For DC and AC voltage | ||
| Degree of protection | IP67 | ||
| Material housing | Brass PA Nickel-plated | ||
| Mounting type | Flush | ||
| Type of mounting | Via lock nut | ||
| Electrical connection | 2-pin M12x1 Plugs | ||
| No-load supply current | ≤ 1,5 mA | ||
| Operational voltage range DC | 20 V ... 320 V | ||
| Short circuit current rating | no | ||
| Voltage drop | ≤ 8 V | ||
| Max. switching frequency AC | 25 Hz | ||
| Hysteresis | 0,02 mm ... 0,44 mm | ||
| Switching output | Non-contacting, 2-wire | ||
| Ambient temperature | -25 °C ... 85 °C | ||
| Assured operating distance | 1,62 mm | ||
| Measuring principle | Inductive | ||
| Approval | RCM trademark c UL us listed (OL) | ||
| Conforms to standard | EN 60947-5-2 |
