| Outside diameter lower tolerance | -0,01 | mm | |
| Bore diameter lower tolerance | -0,01 | mm | |
| Bearing frictional torque | MR | 0,30 | Nm |
| Limiting speed for grease lubrication | nG Grease | 4,000 | |
| Basic static load rating, axial | C0a | 180,000 | |
| Width lower tolerance | -0,25 | mm |
| Outside diameter | D | 72 | mm |
| Bore diameter | d | 30 | mm |
| Thermally safe operating speed | nϑ | 4,000 | |
| Fatigue load limit, axial | Cua | 6,500 | |
| Basic dynamic load rating, axial | Ca | 59,000 | |
| Width | B | 38 | mm |
| Contact angle | α | 60 | ° |
| Rib diameter inner ring | d1 | 51 | mm |
| Minimum chamfer dimension | rmin | 0,60 | mm |
| Minimum diameter shaft | da min | 47 | mm |
