| Contact angle | α | 60 | ° |
| Rib diameter inner ring | d1 | 80 | mm |
| Minimum chamfer dimension | rmin | 0,60 | mm |
| Minimum diameter shaft | da min | 63 | mm |
| Bearing frictional torque | MR | 0,96 | Nm |
| Limiting speed for grease lubrication | nG Grease | 2,500 | |
| Basic static load rating, axial | C0a | 250,000 | |
| Width lower tolerance | -0,25 | mm | |
| Outside diameter lower tolerance | -0,01 | mm | |
| Bore diameter lower tolerance | -0,01 | mm |
| Thermally safe operating speed | nϑ | 2,500 | |
| Fatigue load limit, axial | Cua | 15,200 | |
| Basic dynamic load rating, axial | Ca | 125,000 | |
| Width | B | 54 | mm |
| Outside diameter | D | 110 | mm |
| Bore diameter | d | 50 | mm |
