| Minimum diameter injection pitch | Etk min | 59,30 | mm |
| Diameter shaft shoulder clearance | da | h12 | |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Maximum diameter injection pitch | Etk max | 62,30 | mm |
| Diameter shaft shoulder | da | 56 | mm |
| Shoulder diameter outer ring | Da | 74 | mm |
| Maximum recess radius | ra max | 0,30 | mm |
| Distance between the apexes of the pressure cones | a | 16,70 | mm |
| Bore diameter | d | 50 | mm |
| Width | B | 16 | mm |
| Basic static load rating, radial | C0r | 16,100 | |
| Limiting speed for grease lubrication | nG Grease | 18,000 |
| Outside diameter | D | 80 | mm |
| Basic dynamic load rating, radial | Cr | 29,000 | |
| Fatigue load limit, radial | Cur | 1,710 | |
| Limiting speed for oil lubrication | nG Oil | 28,000 |
| Minimum chamfer dimension | rmin | 1 | mm |
| Contact angle | α | 15 | ° |
| Fabricante | Referencia |
|---|---|
| KOYO | 7010CGLFGP4 |
| Fafnir | 2MM9110WI-CRUL |
| NTN | 7010CT1G/GLP4 |
| RHP | 7010CTSULP4 |
| KOYO | 7010CPAGLFTP4 |
| RHP | 7010CTRSULP4 |
| Marlin-Rockwell Corp. | 110KRDS-BKE#7 |
| GPZ Bearings | 36110 |
| SKF | 7010-CD-GA-P4A (SKF) |
| NTN | 7010CT1G/GLB9 |
| GMN | SH6010CTAP4UL |
| NSK | 7010CTSULP4 |
| SKF | 7010CDGA/PA9A |
| IBC Waelzlager | 7010CTPAPA7UL |
| GMN | S6010CTAP4UL |
| SNFA | EX50-7CE1-UL |
| Norma-Hoffmann Bearings | L7110-LB7U3 |
| SNR | 17010 |
| KOYO | 7010CGLFTP4 |
| RHP | 7010CTRSULP3 |
| RHP | 7010CTSULP3 |
| GAMET | B7010FA7CUL |
| RHP | 7010X2.TAU.EP7 |
