| medium-contacting part stopper material | stainless steel | ||
| rated power ac | 8 v·a | ||
| thermal insulation class of the actuator | b | ||
| coil size | 32 mm | ||
| coil type | placed on top | ||
| protection type ip (max. with suitable connector) | ip65 | ||
| cable plug in delivery | not included | ||
| installation length | 58 mm | ||
| pilot control centrally bolted | yes | ||
| switch time close max. | 400 ms | ||
| switch time open max. | 100 ms | ||
| switch function | on/off | ||
| main valve operating principle | diaphragm valve | ||
| operation | servo-controlled | ||
| generation | ev | ||
| main valve orifice 1 (inch) | 1/2 inch | ||
| pilot control orifice (mm) | 1,1 mm | ||
| kv value (water) | 3,6 m3/h | ||
| pilot control seal material | nbr (nitrile rubber) | ||
| seat seal material | nbr (nitrile rubber) | ||
| temperature environment max | 55 °c | ||
| temperature medium max | 80 °c | ||
| nominal pressure (din en 1333) | pn 10 | ||
| nominal pressure min | 0 bar | ||
| main valve wetted material | brass | ||
| valve seat material | brass | ||
| voltage tolerance negative | 10 % | ||
| voltage frequency | 50 hz | ||
| voltage min / rated voltage | 110 v | ||
| port connection 2 thread type | g | ||
| port connection 1 thread type | g | ||
| port connection 1 type | inner thread | ||
| valve function number of switching positions | 2 | ||
| Customscode | 84818079 |
| medium-contacting part core material | stainless steel | ||
| inrush power consumption ac | 24 v·a | ||
| coil wiring overvoltage protection | without | ||
| coil insulation material (encasement) | pa (polyamide) | ||
| kick and drop coil | energy saving technology not available | ||
| electrical connection position | in direction of flow left | ||
| electrical connection number of contacts | 2 + grounding conductor | ||
| core guide | sliding ring | ||
| nominal operation/duty cycle | 100 % | ||
| switch time close min | 200 ms | ||
| switch time open min | 50 ms | ||
| valve construction | valve complete | ||
| flow | above seat | ||
| actuator type | plunger valve | ||
| Tipo | 6.213 | ||
| main valve orifice 1 (p) (mm) | 13 mm | ||
| qnn value (gas) | 3.900 l/min | ||
| rated power consumption | 8 w | ||
| sealing toward outside material | nbr (nitrile rubber) | ||
| seat seal material category | elastomer | ||
| temperature environment min | -10 °c | ||
| temperature medium min | -10 °c | ||
| nominal pressure max (liquid) | 10 bar | ||
| pilot control material medium-contacting | pa (polyamide) | ||
| valve body cover material | stainless steel | ||
| ac voltage | yes | ||
| voltage tolerance positive | 10 % | ||
| voltage max / rated voltage | 110 v | ||
| port connection 2 thread marking | 1/2 | ||
| port connection 2 type | inner thread | ||
| port connection 1 thread marking | 1/2 | ||
| Función de la válvula | a - normally closed - inlet port 1 (p/nc) | ||
| fluidic port connection number | 2 |
Las cookies son pequeños archivos de texto que pueden mejorar la experiencia del usuario en los sitios web
La ley estipula que podemos almacenar las cookies estrictamente necesarias en su dispositivo para el correcto funcionamiento de este sitio. Para otros tipos de cookies, requerimos su permiso. Esto significa que las cookies necesarias se procesan según el art. 6 (1) (f), mientras que todas las demás cookies, como las de las categorías de preferencias y marketing, se procesan según el art. 6 (1) (a) RGPD.
cookies.cookies_about_type
Tiene la opción de cambiar o retirar su consentimiento en cualquier momento a través de la Declaración de cookies en nuestra sitio web.
Encuentre más información sobre nuestra identidad, cómo contactarnos y nuestras prácticas de procesamiento de datos personales en nuestra Política de Privacidad.
