| Number of lubrication holes | 3 | ||
| D1 - Inner diameter outer ring | 143,2 mm | ||
| ra max - Max shaft & housing fillet radius | 2 mm | ||
| Ce - Min length fro Sleeve | 10 mm | ||
| da min - Min shoulder diameter IR | 101 mm | ||
| BSF - Characteristic rolling element frequency | 6,241 Hz | ||
| BPFI - Characteristic inner ring frequency | 10,391 Hz | ||
| Tmax - Max operating temperature | 200 °C | ||
| Nlim - Mechanical Limit Speed | 5100 tr/min | ||
| Y2 - Upper axial load coefficient | 4,31 | ||
| Y0 - Static axial load coefficient | 2,83 | ||
| Cu - Fatigue limit load | 45,2 kN | ||
| C - Dynamic load | 384 kN | ||
| Associated sleeve reference | H318 | ||
| b - Groove width | 10,2 mm |
| rs - Min fillet radius | 2 mm | ||
| Brand | SNR | ||
| Da max - Max shoulder diameter OR | 149 mm | ||
| db - Min diameter for Sleeve | 96 mm | ||
| da max - Max shoulder diameter IR | 0 mm | ||
| FTF - Characteristic cage frequency | 0,423 Hz | ||
| BPFO - Characteristic outer ring frequency | 7,609 Hz | ||
| Tmin - Min operating temperature | -40 °C | ||
| Nref - Reference thermal speed | 3900 tr/min | ||
| Y1 - Lower axial load coefficient | 2,90 | ||
| e - Coefficient | 0,23 | ||
| C0 - Static load | 398 kN | ||
| Radial clearance class | C4 | ||
| k - Hole diameter | 4,5 mm |
