| a - Charge load application point | 11,3 mm | ||
| C - Outer ring width | 13 mm | ||
| r1a - Max fillet radius | 1,5 mm | ||
| Cb - Min clearance | 3 mm | ||
| Db min - Min OR shoulder diameter | 47,5 mm | ||
| Da min - Min shoulder diameter OR | 42,5 mm | ||
| da max - Max shoulder diameter IR | 28 mm | ||
| FTF - Characteristic cage frequency | 0,394 Hz | ||
| BPFO - Characteristic outer ring frequency | 5,125 Hz | ||
| Tmin - Min operating temperature | -40 °C | ||
| Nref - Reference thermal speed | 8200 tr/min | ||
| Y0 - Static axial load coefficient | 1,10 | ||
| Cu - Fatigue limit load | 4,05 kN | ||
| A2 - Rating life coefficient | 1 | ||
| ISO 355 reference | T2FB020 | ||
| rs - Min fillet radius | 1,5 mm |
| T - Total width | 16,25 mm | ||
| Brand | SNR | ||
| ra max - Max fillet radius | 1,5 mm | ||
| Ca - Min clearance | 3 mm | ||
| Da max - Max shoulder diameter OR | 43,5 mm | ||
| db min - Min IR shoulder diameter | 28,5 mm | ||
| BSF - Characteristic rolling element frequency | 4,429 Hz | ||
| BPFI - Characteristic inner ring frequency | 7,875 Hz | ||
| Tmax - Max operating temperature | 120 °C | ||
| Nlim - Mechanical Limit Speed | 15000 tr/min | ||
| Y2 - Upper axial load coefficient | 2 | ||
| e - Coefficient | 0,30 | ||
| C0 - Static load | 33,2 kN | ||
| C - Dynamic load | 34,7 kN | ||
| r1s - Min fillet radius | 1,5 mm |
