| r(min.) | 1 mm | ||
| t | 24 mm | ||
| ra(max.) | 1 mm | ||
| Sa(min.) | 4 mm | ||
| da(min.) | 72 mm | ||
| db(max.) | 56 mm | ||
| Axial load factors : Y1 | 1,90 | ||
| Load center spread : a | 17.4 mm | ||
| Limiting speeds(Grease lub.) | 4600 min-1 | ||
| Basic load ratings : C0r | 110 kN | ||
| r1(min.) | 1 mm |
| C | 19 mm | ||
| rb(max.) | 1 mm | ||
| Sb(min.) | 5 mm | ||
| db(min.) | 76 mm | ||
| Da(max.) | 74.5 mm | ||
| Axial load factors : Y0 | 1,04 | ||
| Constant e | 0,32 | ||
| Limiting speeds(Oil lub.) | 6100 min-1 | ||
| Fatigue load limit : Cu | 16.3 kN | ||
| Basic load ratings : Cr | 91.8 kN |
| Fabricante | Referencia |
|---|---|
| FAG | 33010 (FAG) |
