| r(min.) | 1.5 mm | ||
| t | 27 mm | ||
| ra(max.) | 1.5 mm | ||
| Sa(min.) | 5 mm | ||
| da(min.) | 85 mm | ||
| db(max.) | 67 mm | ||
| Axial load factors : Y1 | 1,83 | ||
| Load center spread : a | 20.1 mm | ||
| Limiting speeds(Grease lub.) | 3900 min-1 | ||
| Basic load ratings : C0r | 162 kN | ||
| r1(min.) | 1.5 mm |
| C | 21 mm | ||
| rb(max.) | 1.5 mm | ||
| Sb(min.) | 6 mm | ||
| db(min.) | 90 mm | ||
| Da(max.) | 86.5 mm | ||
| Axial load factors : Y0 | 1,01 | ||
| Constant e | 0,33 | ||
| Limiting speeds(Oil lub.) | 5200 min-1 | ||
| Fatigue load limit : Cu | 24.5 kN | ||
| Basic load ratings : Cr | 127 kN |
| Fabricante | Referencia |
|---|---|
| FAG | 33012 (FAG) |
