| D2 - Inner diameter outer ring | 65,57 mm | ||
| Brand | SNR | ||
| r1a - Max fillet radius | 0,6 mm | ||
| Da max - Max shoulder diameter OR | 65 mm | ||
| da min - Min shoulder diameter IR | 42 mm | ||
| FTF - Characteristic cage frequency | 0,4 Hz | ||
| BPFO - Characteristic outer ring frequency | 5,196 Hz | ||
| Nlim - Oil lubrication limit speed | 31000 tr/min | ||
| Tmin - Min operating temperature | -30 °C | ||
| Axial rigidity | 61 N/µm | ||
| Preload level | 7 | ||
| f0 - Coefficient | 13,95 | ||
| C0 - Static load | 21,6 kN | ||
| r1s - Min fillet radius | 0,6 mm | ||
| α - Contact angle | 15 ° |
| D1 - Inner diameter outer ring | 60,55 mm | ||
| ra max - Max shaft & housing fillet radius | 1 mm | ||
| Db max - Max OR shoulder diameter | 65 mm | ||
| db min - Min IR shoulder diameter | 42 mm | ||
| BSF - Characteristic rolling element frequency | 4,621 Hz | ||
| BPFI - Characteristic inner ring frequency | 7,804 Hz | ||
| Nlim - Grease lubrication limit speed | 19500 tr/min | ||
| Tmax - Max operating temperature | 120 °C | ||
| Radial rigidity | 335 N/µm | ||
| Preload value | 0,18 kN | ||
| Axial displacement K Factor | 1,42 | ||
| Cu - Fatigue limit load | 1,16 kN | ||
| C - Dynamic load | 32,1 kN | ||
| rs - Min fillet radius | 1,1 mm | ||
| a - Charge load application point | 16 mm |
