| Basic dynamic load rating, radial | Cr | 8,992.806 | |
| Outside diameter | D | 3,35 | mm |
| Reference speed | nϑr | 8,000 | |
| Fatigue load limit, radial | Cur | 420.414 |
| Width | B | 0,75 | mm |
| Bore diameter | d | 1,77 | mm |
| Limiting speed | nG | 11,000 | |
| Basic static load rating, radial | C0r | 6,070.144 |
| Contact angle | α | 40 | ° |
| Shoulder diameter on inner ring wide side face | d1 | 2,41 | mm |
| Minimum chamfer dimension | rmin | 0,02 | mm |
| Distance between the apexes of the pressure cones | a | 1,46 | mm |
| Shoulder diameter on outer ring wide side face | D1 | 2,75 | mm |
| Maximum fillet radius of housing | ra1 max | 0,02 | mm |
| Maximum diameter of housing shoulder | Db max | 3,18 | mm |
| Minimum diameter of shaft shoulder | da min | 2,05 | mm |
| Maximum fillet radius of shaft | ra max | 0,04 | mm |
| Maximum diameter of housing shoulder | Da max | 78 | mm |
