| Contact angle | α | 40 | ° |
| Shoulder diameter on inner ring wide side face | d1 | 250 | mm |
| Minimum chamfer dimension | rmin | 1,50 | mm |
| Distance between the apexes of the pressure cones | a | 139 | mm |
| Shoulder diameter on outer ring wide side face | D1 | 281 | mm |
| Maximum fillet radius of housing | ra1 max | 1,50 | mm |
| Maximum diameter of housing shoulder | Db max | 331 | mm |
| Minimum diameter of shaft shoulder | da min | 207 | mm |
| Maximum fillet radius of shaft | ra max | 3 | mm |
| Maximum diameter of housing shoulder | Da max | 323 | mm |
| Reference speed | nϑr | 2,140 | |
| Fatigue load limit, radial | Cur | 13,600 | |
| Basic dynamic load rating, radial | Cr | 300,000 | |
| Outside diameter | D | 340 | mm |
| Limiting speed | nG | 2,950 | |
| Basic static load rating, radial | C0r | 425,000 | |
| Width | B | 55 | mm |
| Bore diameter | d | 190 | mm |
| Fabricante | Referencia |
|---|---|
| Marlin-Rockwell Corp. | 7238PDU |
