Weight | 1.25103 lb | ||
Shock resistance | endurance 10 to 55 hz; amplitude 0.75 mm; x, y, z for 2 hours each | ||
ambient humidity | 35 to 85% rh (no condensation) | ||
insulation resistance | between case and ac line: 500 vdc, 50 m or more | ||
power consumption | 20 va or less | ||
output transistor mode | npn open collector max 30 vdc, 50 ma | ||
output delay time | 5 ms or less (for normal output) | ||
preset output configuration | compare/hold/one-shot (100 ms fixed pulse) | ||
sensor power supply | 10.8 to 13.2 vdc, 60 ma | ||
counting speed | 100 khz ?1 | ||
count input | no-voltage pulse input | ||
memory holding {storage medium} | setting value (always held), count value (hold/non-hold switching), {e2rom (warning display after writing approx. 800,000 times: e2ful)} | ||
display system | lcd (with back light) | ||
operation mode | operating mode, data setting mode, function setting mode | ||
mounting | surface mounting (din rail or screw stop) | ||
model | ceu5 |
impact resistance | endurance 10 g; x, y, z directions, 3 times each | ||
noise resistance | square wave noise from a noise simulator (pulse duration 1 ?s) between power supply terminals ?2000 v, i/o line ?600 v | ||
Ambient temperature | 0 to 50c (no freezing) | ||
withstand voltage | between case and ac line: 1500 vac for 1 min. between case and signal ground: 500 vac for 1 min. | ||
power supply voltage | 90 to 264 vac | ||
communication system | rs-232c | ||
output type | separate 5 point output/binary code output | ||
output signal type | preset output, cylinder stop output | ||
control signal input | voltage input (12 vdc or 24 vdc) | ||
pulse signal system | 90 phase difference input ?1/ up/down separate input ?2 | ||
input signal type | count input, control signal input (reset, hold, bank selection) | ||
number of digits | 6 digits | ||
reset system | external reset terminal | ||
operating system | adding - subtracting type | ||
Type | multi-counter |