| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Bore diameter bearing, upper tolerance | dOT | 0,02 | mm |
| Distance drilling with/shaft start | l7 | 32 | mm |
| Shank Length External thread head | l1 | 55 | mm |
| Width of the rod end | C1 | 22 | mm |
| Thread size | d3 | M24x2 | |
| Outer flange diameter inner ring | d1 | 29,50 | mm |
| Bore diameter bearing, tolerance | dT | H7 | |
| Radial Clearance | Gr | 0 - 0,035 | |
| Total length external thread head | l2 | 124 | mm |
| Tilt angle | α | 15 | ° |
| Shank Length External thread rod | h | 94 | mm |
| Outer eye diameter | d2 | 60 | mm |
| Ball diameter | dK | 42,85 | mm |
| Edge Spacing | r1smin | 0,30 | mm |
| Basic static load rating, radial | C0r | 72,900 | |
| Width inner ring | B | 31 | mm |
| Bore diameter bearing | d | 25 | mm |
| Basic dynamic load rating, radial | Cr | 47,100 | |
| Outside diameter bearing | D | 47 | mm |
| Fabricante | Referencia |
|---|---|
| Durbal | BEMN25-20-501 (DURBAL) |
| Schaublin | SMG25 |
| WSW Wälzlager | SABP25S |
| SKF | SAKAC25 M (SKF) |
| Hirschmann | SMC25 |
