| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Bore diameter bearing, tolerance | dT | H7 | |
| Thread length external thread | l1 | 25 | mm |
| Width of the rod end | C1 | 9 | mm |
| Thread size | d3 | M8 | |
| Ball diameter | dK | 15,88 | mm |
| Bore diameter bearing, upper tolerance | dOT | 0,02 | mm |
| Radial Clearance | Gr | 0 - 0,035 | |
| Tilt angle | α | 14 | ° |
| Shank Length External thread rod | h | 42 | mm |
| Outer flange diameter inner ring | d1 | 10,30 | mm |
| Edge Spacing | r1smin | 0,30 | mm |
| Basic static load rating, radial | C0r | 12,900 | |
| Width inner ring | B | 12 | mm |
| Outside diameter bearing | D | 19 | mm |
| Bore diameter bearing | d | 8 | mm |
| Basic dynamic load rating, radial | Cr | 12,900 | |
| Total length external thread rod | l2 | 54 | mm |
| Outer eye diameter | d2 | 24 | mm |
| Fabricante | Referencia |
|---|---|
| Durbal | BEM08-20-501 (DURBAL) |
| WSW Wälzlager | SAK8C |
| SKF | SAKB8 F (SKF) |
| IKO | POS8-EC (IKO) |
| Askubal | KA8-D |
| SKF | SAKAB8T |
| Hirschmann | SMCP8 |
