| Width inner ring, lower tolerance | BUT | -0,20 | mm |
| Outside diameter, lower tolerance | Do UT | -0,03 | mm |
| Edge Spacing | r1smin | 1 | mm |
| Ball diameter | dK | 160 | mm |
| Radial Clearance | Gr | 0,085 - 0,165 | |
| Bore diameter bearing, lower tolerance | dUT | -0,02 | mm |
| Tilt angle | α | 12 | ° |
| Width Outer ring | C | 70 | mm |
| Connection measure Inner ring | da max | 124,80 | mm |
| Basic static load rating, radial | C0r | 4,660,000 | |
| Width inner ring | B | 100 | mm |
| Bore diameter bearing | d | 110 | mm |
| Basic dynamic load rating, radial | Cr | 1,210,000 | |
| Outside diameter bearing | D | 180 | mm |
| Fabricante | Referencia |
|---|---|
| Torrington | 110FSH180-SS |
| Torrington | 110FSH180 |
| SKF | GEH110 ES-2RS (SKF) |
| Hung | GE110B-A |
| Elges | GE110FO |
| IKO | GE110GS |
| IKO | GE110GS-2RS |
| RBC | MBH110120 |
| RBC | MBH110120-SS |
| LS Bearings | GEG110ES-2RS |
