| Nominal width | B | 14 | mm |
| Bore diameter | d | 17 | mm |
| Chamfer dimension bore | r1 | min.0.3 | |
| Width annular lubrication groove at inner ring | b1 | 2,40 | mm |
| Raceway diameter inner ring | F | 25 | mm |
| Width Outer ring | C | 10 | mm |
| Outside diameter | d2 | 30 | mm |
| Chamfer dimension outer ring | r1,2 | min.0.3 | |
| Diameter lubrication hole (outer ring) | M | 1,50 | mm |
| Width annular lubrication groove at outer ring | b | 2,30 | mm |
| Angle of tilt | α | 10 | ° |
| Fabricante | Referencia |
|---|---|
| INA | GE17-DO (INA) |
