| Bore diameter | d | 35 | mm |
| Nominal width | B | 25 | mm |
| Angle of tilt | α | 6 | ° |
| Width annular lubrication groove at outer ring | b | 3,80 | mm |
| Diameter lubrication hole (outer ring) | M | 2,50 | mm |
| Chamfer dimension outer ring | r1,2 | min.1 |
| Outside diameter | d2 | 55 | mm |
| Width Outer ring | C | 20 | mm |
| Raceway diameter inner ring | F | 47 | mm |
| Width annular lubrication groove at inner ring | b1 | 4 | mm |
| Chamfer dimension bore | r1 | min.0.6 |
| Fabricante | Referencia |
|---|---|
| INA | GE35-DO (INA) |
