| Guidance rib diameter of inner ring | d1 | 62 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 1,50 | mm |
| Distance between the apexes of the pressure cones | a | 16 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 3,60 | mm |
| Maximum fillet radius of shaft | ra max | 3,60 | mm |
| Maximum diameter of housing shoulder | Da max | 68 | mm |
| Maximum diameter of shaft shoulder | da max | 51 | mm |
| Minimum axial space | Ca min | 4 | mm |
| Minimum diameter of shaft shoulder | db min | 57 | mm |
| Limiting speed | nG | 9,600 | |
| Basic static load rating, radial | C0r | 67,000 | |
| Width, total | T | 18 | mm |
| Width, inner ring | Bi | 18 | mm |
| Bore diameter | d | 45,99 | mm |
| Fatigue load limit, radial | Cur | 8,000 | |
| Basic dynamic load rating, radial | Cr | 48,500 | |
| Width, outer ring | B | 14 | mm |
| Outside diameter | D | 74,98 | mm |
