FESTO 565513 Electroválvula

MHJ10-S-2,5-MF

89 € (sin IVA)
1 uds. con envío de 1 a 3 días a España

Especificaciones

Presión de funcionamiento 0,5 bar ... 6 bar
Actuation Type Electric
Posición de montaje optional
Conexión neumática Sub-base
Anchura 10 mm
Peso 75g
Material de los tornillos Steel
Material del cuerpo PA-reinforced PPS reinforced
Nota sobre el material RoHS-compliant
Conexión neumática 1 Sub-base
Longitud del cable 2,5 m
Peso del producto 75 g
Temperatura ambiente -5 °C ... 60 °C
Permissible solenoid surface temperature 120 °C
Conformidad PWIS VDMA24364-B2-L
Restrictions for environmental and media temperature As a function of switching frequency (see graph)
Medio de funcionamiento Compressed air to ISO 8573-1:2010 [7:4:4]
Note on input current Linear rise 0.09-0.44 mA with a trigger signal of 3-15 V 0.44-15.44 mA with a trigger signal of 15-30 V
Valores característicos de las bobinas 24 V DC: low-current phase 2.0 W, high-current phase 7.0 W
Input resistance 34 kOhm
Tolerance switching time on +/-15%
Switching time off 0.6 MPa (6 bar, 87 psi) and 24 V in new condition 0,4 ms
Switching time off 0.05 MPa (0.5 bar, 7.25 psi) and 24 V in new condition 0,5 ms
Switching time off 0.4 MPa (4 bar, 58 psi) and 24 V in new condition 0,4 ms
Frecuencia de conmutación máx. 1.000 Hz
b value 0,38
Protección contra inversión de polaridad For operating voltage
Sentido de flujo Non-reversible
Accionamiento manual auxiliar None
Principio de sellado Hard
Patrón uniforme 10,5 mm
Símbolo KC KC-EMV
Grado de protección IP55
Forma constructiva Poppet valve without spring return
Operating voltage 24V DC
Standard nominal flow rate 100 l/min
Tipo de accionamiento Electric
Material de la cubierta aislante del cable PUR
Material de las juntas HNBR
Conexión neumática 2 Sub-base
Tipo de fijación On sub-base
Conexión eléctrica 3-wire Cable
Max. tightening torque for valve mounting 0,7 Nm
Temperatura del medio -5 °C ... 60 °C
Temperatura de almacenamiento -20 °C ... 50 °C
Clase de resistencia a la corrosión CRC 2 - Moderate corrosion stress
Nota sobre el medio de trabajo/mando Lubricated operation not possible
Fluctuaciones de tensión admisibles +/- 10 %
Trigger signal voltage range DC 3 V ... 30 V
Tiempo de conexión 100%
Margen de tensiones de servicio DC 21,6 V ... 26,4 V
Tolerance switching time off +15%/-25%
Switching time on 0.6 MPa (6 bar, 87 psi) and 24 V in new condition 0,9 ms
Switching time on 0.05 MPa (0.5 bar, 7.25 psi) and 24 V in new condition 0,8 ms
Switching time on 0.4 MPa (4 bar, 58 psi) and 24 V in new condition 0,8 ms
C value 0,4 l/sbar
Funciones adicionales Spark arresting Holding current reduction with energy recovery Safety shut-off
Símbolo 00992259
Tipo de control Direct
Posición de montaje optional
Note on operation Fixed power supply must be able to supply at least 1.7 A without voltage drop Do not operate without flow. For block mounting with flow, max. ambient temperature 45°C.
Marcado CE (véase la declaración de conformidad) To EU EMC Directive
Certificación RCM trademark
Tipo de reposición Pneumatic spring
Presión de funcionamiento 0,5 bar ... 6 bar
Conexión neumática de utilización Sub-base
Anchura 10 mm
Función de la válvula 2/2-way, closed, monostable
89 € (sin IVA)
Stock 1 uds.
Referencia 565513
Fabricante FESTO
Unidades Precio / Unidad
1+ 89 €
  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros