| Conforms to standard | DIN 47100 | ||
| Electrical connection 1, function | Field device side | ||
| Electrical connection 1, connection type | Plugs | ||
| Electrical connection 1, connector system | Sub-D | ||
| Electrical connection 1, used connections/cores | 15 | ||
| Electrical connection 1, connection pattern | 995.641 | ||
| Electrical connection 2, connection type | Cable | ||
| Electrical connection 2, number of connections/cores | 15 | ||
| Operational voltage range DC | 0 V ... 30 V | ||
| Cable length | 1 m | ||
| Bending radius, fixed cable | ≥ 33 mm | ||
| Cable structure | 18 x 0.14 mm² | ||
| Wire ends | Wire end sleeve | ||
| Note on degree of protection | In assembled state | ||
| Ambient temperature with moving cable | -30 °C ... 80 °C | ||
| CE marking (see declaration of conformity) | To UK RoHS instructions | ||
| Note on materials | RoHS-compliant | ||
| Material cable sheath | TPE-U(PUR) |
| Cable designation | Without inscription label holder | ||
| Electrical connection 1, design | Angular | ||
| Electrical connection 1, cable outlet | Straight | ||
| Electrical connection 1, number of connections/cores | 15 | ||
| Electrical connection 1, type of mounting | 2x screw 4-40 UNC-2A | ||
| Electrical connection 2, function | Controller side | ||
| Electrical connection 2, connector system | Open end | ||
| Electrical connection 2, used connections/cores | 15 | ||
| Nominal operating voltage DC | 24 V | ||
| Cable characteristic | Suitable for energy chains | ||
| Cable diameter | 6,6 mm | ||
| Nominal cross section conductor | 0,14 mm² | ||
| Degree of protection | IP50 | ||
| Ambient temperature | -30 °C ... 80 °C | ||
| CE mark (see declaration of conformity) | In accordance with EU RoHS Directive | ||
| LABS (PWIS) conformity | VDMA24364-B2-L | ||
| Pollution degree | 3 | ||
| Cable sheath colour | grey |
