| Size | 64 | ||
| Material bowl | Stainless steel casting | ||
| Material number housing | 1.4409/CF3M(316L) | ||
| Material number of filter | 1.4404/316L | ||
| Material spring | High-alloy stainless steel | ||
| Material mounting bracket | High-alloy stainless steel | ||
| Material number of filter support | 1.4409/CF3M(316L) | ||
| Material number of drain screw | 1.4404/316L | ||
| Pneumatic connection, port 2 | G1/4 | ||
| Pressure gauge connection | G1/4 | ||
| Product weight | 1.965 g | ||
| Media temperature | -60 °C ... 80 °C | ||
| Storage temperature | -60 °C ... 80 °C | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [-:4:-] Inert gases | ||
| Standard nominal flow rate | 1.920 l/min | ||
| Max. pressure hysteresis | 0,2 bar | ||
| Operating pressure | 1 bar ... 20 bar | ||
| Symbol | 991.586 | ||
| Max. condensate volume | 30 ml | ||
| Design | Filter regulator without pressure gauge | ||
| Grade of filtration | 5 µm | ||
| Actuator lock | Adjusting screw with lock |
| Material number of bowl | 1.4409/CF3M (316L) | ||
| Material adjusting screw | High-alloy stainless steel | ||
| Material housing | Stainless steel casting | ||
| Material filter | High-alloy stainless steel | ||
| Material seals | CR NBR VMQ | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Material filter carrier | Stainless steel casting | ||
| Material of drain screw | High-alloy stainless steel | ||
| Pneumatic connection, port 1 | G1/4 | ||
| Type of mounting | In-line installation Via mounting kit Either: | ||
| Ambient temperature | -60 °C ... 80 °C | ||
| Air purity class at output | Compressed air to ISO 8573-1:2010 [6:4:4] | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Explosion protection | The information in the certificate must be observed! Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
| Max. standard flow rate | 2.400 l/min | ||
| Pressure regulation range | 0,5 bar ... 12 bar | ||
| Pressure gauge (ANALOG) or Pressure display (DIGITAL) | Prepared for G1/4 | ||
| Controller function | Via primary pressure compensation With secondary venting | ||
| Conforms to standard | NACE MR0175/ISO 15156 (housing and bowl) | ||
| Condensate drain | Manually rotating | ||
| Mounting position | Vertical +/-5° | ||
| Series | P |
