| Size | 30 | ||
| D | 62 | mm | |
| D1 | 48,20 | mm | |
| H | 70 | mm |
| dw | 30,16 | mm | |
| Tolerance for D | ± 0.125 | ||
| H | 24,40 | mm | |
| A | 17 | mm |
| Fpr | 1.350 | N | |
| Tolerance for preload and ultimate load | + 15 - 7.5 |
||
| m | 0,57 | kg | |
| Size | 30 |
| Ultimate load (Under ultimate load the ball transfer unit recedes completely) | 1.600 | N | |
| vmax (In case of prolonged periods of use at speeds above 1 m/s, an increase in temperature and reduction in service life needs to be reckoned with depending on the load. ) | 2 | m/s | |
| Operating conditions | Operating conditions | ||
| Admissible operating temperature (min ... max) (At temperatures above 100 °C, only bright metal load balls without a felt seal should be used. Make allowance for reduction in load capacity. Use high-temperature lubricant! Follow the manufacturer’s instructions! The existing lubricant oil may have to be washed out. ) | -30 °C ... +100 °C |
