| Size | 22 | ||
| D | 36 | mm | |
| D1 | 45 | mm | |
| Tolerance for H | ± 0.2 | ||
| B | 6,20 |
| dw | 22,23 | mm | |
| Tolerance for D | ± 0.08 | ||
| H | 9,80 | mm | |
| H | 29,50 | mm |
| C | 1.300 | N | |
| vmax (In case of prolonged periods of use at speeds above 1 m/s, an increase in temperature and reduction in service life needs to be reckoned with depending on the load. ) | 2 | m/s | |
| Operating conditions | Operating conditions | ||
| Admissible operating temperature (min ... max) (At temperatures above 100 °C, only bright metal load balls without a felt seal should be used. Make allowance for reduction in load capacity. Use high-temperature lubricant! Follow the manufacturer’s instructions! The existing lubricant oil may have to be washed out. ) | -30 °C ... +100 °C |
| C0 | 3.000 | N | |
| m | 0,15 | kg | |
| Size | 22 |
