Especificaciones
Lubricación | Peso |
---|---|
No initial lubrication | 40g |
D | 16 | mm | |
C1 | 33 mm -0.3 | ||
D1 | 15,20 | mm |
C | 46 mm -0.3 | ||
C2 | 1,10 |
amax | 100 | m/s² | |
m | 0,04 | kg | |
Breakaway force | 1 | N | |
Working bore diameter tolerance | + 9 - 1 |
||
Operating conditions | Operating conditions |
vmax | 2,50 | m/s | |
FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 0,50 | N | |
Rows of balls | 4 | ||
Shaft radial clearance h6 (Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7. ) | + 15 + 2 |
||
Permissible ambient temperature (min ... max) (Only unsealed Linear Bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity. ) | -10 °C ... +80 °C |