| D | 47 | mm | |
| C1 | 104.2 mm -0.4 | ||
| D1 | 44,50 | mm |
| C | 123 mm -0.4 | ||
| C2 | 1,85 |
| amax | 100 | m/s² | |
| m | 0,62 | kg | |
| Breakaway force | 18 | N | |
| Working bore diameter tolerance | + 13 - 2 |
||
| Operating conditions | Operating conditions |
| vmax | 2,50 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 6 | N | |
| Rows of balls | 6 | ||
| Shaft radial clearance h6 (Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7. ) | + 22 + 2 |
||
| Permissible ambient temperature (min ... max) (Only unsealed Linear Bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity. ) | -10 °C ... +80 °C |
