a)
For O-ring
Ø 7 • 1.5 (mm)
b)
Lube nipple, thread M6 – 8 deep:
Connection possible on all sides.
Dimensions differ among different connection pieces.
See "Accessories" for more information about lube ports.
c)
For roller guide rails of accuracy class H, this base area may be without a groove for manufacturing reasons.
| T (Dimension T = Division of the Roller Guide Rail) | 75 | mm | |
| A | 170 | mm | |
| A2 | 63 | mm | |
| B | 335 | ||
| B2 | 339,50 | mm | |
| d8 | 8 | mm | |
| E1 | 142 | mm | |
| E8 | 35 | mm | |
| E9 | 9,30 | mm | |
| H | 90 | mm | |
| Dimension H2 with cover strip | 58,15 | mm | |
| K1 | 49,50 | mm | |
| N1 | 23 | mm | |
| N5 | 9,30 | mm | |
| ØS1 | 14,5 | ||
| ØS5 | 18 | mm |
| V1 | 15 | mm | |
| A1 | 85 | mm | |
| A3 | 53,50 | mm | |
| B1 | 275 | mm | |
| B3 | 345 | mm | |
| d8.2 | 8 | mm | |
| E2 | 200 | mm | |
| E8.2 | 106 | mm | |
| E9.2 | 55 | mm | |
| H1 | 76 | mm | |
| Dimension H2 without cover strip | 57,85 | mm | |
| K2 | 52,50 | mm | |
| N2 | 21,50 | mm | |
| N6 | 36.5 mm ±0.5 | ||
| S2 | M16 | ||
| S9 (Thread for adjoining parts) | M4 ‒ 7mm deep |
| amax (Prerequisite: There must be preload, even during operation under load.) | 150 | m/s² | |
| m | 20,30 | kg | |
| m (Without friction of seal) | 0,0004 ... 0,001 | ||
| Size | 65 |
| vmax | 3 | m/s | |
| FR (Guideline value for frictional drags of the complete, sealed and lubricated roller runner blocks. ) | 90 | N | |
| Operating conditions | Operating conditions | ||
| Permissible ambient temperature (min ... max) (Brief peaks up to 100 °C are permitted. For even lower sub-zero temperatures, please consult us. ) | -10 °C ... +80 °C |
