| Bore diameter | d | 50,80 | mm |
| Height of attachment slot | N2 | 64 | mm |
| Diameter of attachment bolt hole | N | 35 | mm |
| Length attachment end | L2 | 19 | mm |
| Overall length | L | 171 | mm |
| Distance between bottoms of location slot | H1 | 130 | mm |
| Distance from locking device side face to thread centre | B4 | 9 | mm |
| Width Inner ring | B | 55,60 | mm |
| Width of flange in which location slot is provided | A2 | 41 | mm |
| Overall width | A | 64 | mm |
| Distance from locking device side face to raceway centre | s1 | 33,40 | mm |
| Length of attachment slot | N1 | 25 | mm |
| Length of locations slot | L3 | 95 | mm |
| Distance from attachment end face to centreline of spherical seat diameter | L1 | 106 | mm |
| Height of attachment end | H2 | 102 | mm |
| Overall height | H | 146 | mm |
| Overall bearing width | B | 55,60 | mm |
| Standout of end cover | A5 | 33,50 | mm |
| Width of location slot | A1 | 27 | mm |
| Shoulder diameter inner ring | d1 | ≈69.06 |
| Fabricante | Referencia |
|---|---|
| FAG | UCT211-32-J7 |
