FESTO 578088 Válvula distribuidora proporcional

VPWP-8-L-5-Q-10-E-F

1.428,58 € (sin IVA)
2 uds. con envío de 1 a 3 días a España

Especificaciones

Serie (VPWP) Proportional directional control valve
Nominal width [mm] (8) 8
Directional control valve type (L) In-line valve
Función de la válvula (5) 5/3-way valve
Conexión neumática (Q) Without push-in fitting
Pressure range [bar] (10) 0 ... 10
Tipo de indicación (E) LED
Exhaust (F) Flat plate silencer
EU certification Without
Material del cuerpo Wrought aluminium alloy Anodised
Nota sobre el material RoHS-compliant
Conexión neumática 4 G1/4
Conexión neumática 2 G1/4
Colour of connections Port 2: Blue Connection 4: black
Fieldbus interface electrical connection Socket M8 4-pin
Electrical connection fieldbus interface IN Plugs M9 5-pin
Digital output design To IEC 61131-2 Positive logic (PNP) No galvanic isolation Protected against short circuits Reverse supply with no damage
Precisión de repetición FS < 1 %
Pressure resolution 0,01 bar
Temperatura ambiente 0 °C ... 50 °C
Temperatura del medio 0 °C ... 50 °C
Clase de resistencia a la corrosión CRC 1 - Low corrosion stress
Medio de funcionamiento Compressed air to ISO 8573-1:2010 [6:4:4]
Tipo de protección contra explosión de gas Ex nA IIC T5 X Gc
Protección antideflagrante Zone 2 (ATEX)
Marcado CE (véase la declaración de conformidad) To EU EMC Directive To EU Explosion Protection Directive (ATEX) In accordance with EU RoHS Directive
Supply voltage of the voltage output 24 V load voltage
Nominal load voltage DC 24 V
Max. current consumption of valve drive 1,2 A
Max. load current of the voltage output 500 mA
Margen de tensiones de servicio DC 18 V ... 30 V
Standard nominal flow rate 1.400 l/min
Operating pressure positioning/Soft Stop 4 bar ... 8 bar
Status displays LED yellow = PL (power load) LED green = power LED red = error
Símbolo 00992136
Tipo de control Direct
Tipo de reposición Magnetic spring
Posición de montaje optional Preferably horizontal (display elements facing upwards) If the valve is moved, it must be mounted at a right angle to the direction of movement
Tipo de accionamiento Electric
Material de la tapa PA-reinforced
Conexión neumática 5 G1/4
Conexión neumática 3 G1/4
Conexión neumática 1 G1/4
Tipo de fijación With through-hole With accessories
Electrical connection fieldbus interface OUT Socket M9 5-pin
Control-Interface Digital CAN bus with Festo protocol Integrated terminating resistor
Design of the 24 V voltage output Reverse supply with no damage No galvanic isolation Protected against short circuits Reverse supply with no damage
Error de linealidad FS < 1,5 %
Peso del producto 1.060 g
Grado de protección IP65 In assembled state
Conformidad PWIS VDMA24364-B1/B2-L
Nota sobre el medio de trabajo/mando Lubricated operation not possible
Temperatura ambiente Ex 0°C <= Ta <= +50°C
Categoría ATEX para gas II 3G
CE marking (see declaration of conformity) To UK instructions for EMC To UK EX instructions To UK RoHS instructions
Certificación RCM trademark
Supply voltage of the digital output 24 V load voltage
Max. current consumption, logic 0,15 A
Max. load current of the digital output 500 mA
Load voltage range DC 18 V ... 30 V
Tensión nominal de funcionamiento DC 24 V
Presión nominal de funcionamiento 87 psi
Presión de funcionamiento 0 bar ... 10 bar
Función de la válvula 5/3-way proportional directional control valve, closed
Sentido de flujo Non-reversible
Indicación de seguridad Safety position VPWP: if there is a problem with the control interface, the valve assumes the closed mid-position.
Forma constructiva Piston gate valve With integrated pressure sensors
Principio de sellado Hard
Diámetro nominal 8 mm
1.428,58 € (sin IVA)
Stock 2 uds.
Referencia 578088
Fabricante FESTO
Unidades Precio / Unidad
1+ 1.428,58 €

  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros