FESTO 8063636 Cabeza de dosificación

VTOE-8-D9-T3-M22C-08-V-S-PC-M

3.384,39 € (sin IVA)
1 uds. con envío de 1 a 3 días a España

Especificaciones

Serie (VTOE) Dispense head
Valve positions (8) 8 valve positions
Output connection (D9) Nozzle, length 30 mm, nominal size 1.0 mm
Input connection (T3) For tubing 3 mm
Función de la válvula (M22C) 2/2-way valve, normally closed
Nominal width (08) 0.8 mm
Diaphragm and sealing material (V) FPM
Material de la carcasa (S) PPS
Manifold block material (PC) Polycarbonate
Valve control (M) Multi-pin electric
Grado de ensuciamiento 2
Nominal altitude of use <= 2000 m NHN
materiales en contacto con el medio ETFE FPM PC PEEK PPS High-alloy stainless steel
Material number of dosing needle 1,43
Note on fluid connection Fitting enclosed for tubing with 3 mm outside diameter
Tipo de fijación Via through-hole for M3 screw Via female thread and centring sleeve Either:
Peso del producto 220 g
Nota sobre el grado de protección In assembled state
Temperatura del medio 5 °C ... 50 °C
Conformidad PWIS VDMA24364-B2-L
Resistencia a los golpes Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Nota sobre la utilización See application note (available on the Support Portal at festo.com)
Medio Liquid media
Tensión nominal de funcionamiento DC 24 V
Electrical power consumption 1,8 W
Note on switching time off Depends on configuration, environment and application
Note on switching time on Depends on configuration, environment and application
Note on switching frequency Dependent on the ambient temperature and installation state
Note on dosing precision Depends on configuration, environment and application
Note on dosing volume Depends on configuration, environment and application
Water flow rate at max. operating pressure 2000 µl/s
Tipo de reposición Mechanical spring
Principio de sellado Soft
Length of dosing needle 30 mm
Diámetro nominal 0,8 mm
Presión de funcionamiento 0 psi ... 7,25 psi
Humedad relativa del aire 0 - 95% Non-condensing
Tipo de accionamiento Electric
Nota sobre el material RoHS-compliant
Material of dosing needle High-alloy stainless steel
Fluid connection 8x UNF1/4-28
Conexión eléctrica 9-pin Plugs Sub-D
Temperatura ambiente 5 °C ... 40 °C
Grado de protección IP30
Temperatura de almacenamiento -20 °C ... 70 °C
Clase de resistencia a la corrosión CRC 0 - No corrosion stress
Resistencia a las vibraciones Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Note on the medium Observe resistance of materials that come into contact with the media
Fluctuaciones de tensión admisibles +/- 10 %
Information on power consumption Specification per valve
Tiempo de conexión 50% (max. switch-on time 1 s)
Tiempo de conmutación OFF 2 ms
Tiempo de conmutación ON 7 ms
Frecuencia de conmutación máx. 4 Hz
Typical dosing precision <1% CV for volumes >5 µl <2.5% CV for volumes between 1-5 µl
Min. dosing volume 5 µl
Tipo de control Direct
Posición de montaje optional
Patrón uniforme 9 mm
Nominal width of dosing needle 1 mm
Internal volume 113 µl valve with fluid connections
Función de la válvula 2/2-way, closed, monostable
3.384,39 € (sin IVA)
Stock 1 uds.
Referencia 8063636
Fabricante FESTO
Unidades Precio / Unidad
1+ 3.384,39 €

  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros