Especificaciones
Patín de rodillos CR con revestimiento resistente a la corrosión, acabado plateado mate, cromado
Tamaño | Clases de Precarga | Junta | Lubricación | Clase de Precisión |
---|---|---|---|---|
55/85 | C2 | DS | No initial lubrication | H |
a)
For O-ring
size 55/85: Ø 7 · 1.5 (mm)
size 65/100: Ø 12 · 1.5 (mm)
Open lube port if necessary (see section entitled "Lubrication").
b)
Recommended position for pin holes
(E4 dimensions, see section entitled "Notes for mounting", segment "Pinned fitting").
Rough-drilled holes made for may exist at this position for manufacturing reasons. They are suitable for drilling out.
c)
Lube nipple, thread M6 – 8 deep:
Connection possible on all sides.
Dimensions differ among different connection pieces. See "Accessories" for more information about lube ports.
A | 165 | mm | |
A2 | 85 | mm | |
A3.1 | 40 | mm | |
B1 | 162,10 | mm | |
B3 | 216 | mm | |
E2 | 95 | mm | |
E8 | 40 | mm | |
E9 | 10,75 | mm | |
H | 80 | mm | |
Dimension H2 with cover strip | 47,85 | mm | |
K2 | 46,55 | mm | |
N5 | 19 | mm | |
N6 | 31.2 mm ±0.5 | ||
ØS5 | 14 | mm | |
T3 | 32 | mm |
A1 | 82,50 | mm | |
A3 | 40 | mm | |
B | 205,50 | ||
B2 | 209,50 | mm | |
E1 | 140 | mm | |
E3 | 40 | mm | |
E8.2 | 113,60 | mm | |
E9.2 | 50,75 | mm | |
H1 | 68 | mm | |
K1 | 43,55 | mm | |
N3 | 19 | mm | |
N5.1 | 19 | mm | |
S2 | M12 | ||
T (Dimension T = Division of the Roller Guide Rail) | 60 | mm | |
V1 | 12 | mm |
C | 165.000 | N | |
Mt | 7.450 | Nm | |
ML | 4.030 | Nm |
C0 | 345.300 | N | |
Mt0 | 15.650 | Nm | |
ML0 | 8.440 | Nm |
Stock | Pedir cotización |
---|---|
Referencia | R187252360 |
Fabricante | Rexroth |
Unidades | Precio / Unidad |
---|---|
1+ | $5.809,98 |